King's Lynn Roofing Specialists
01553 603644 Get a Quote →
Lead Work

Lead Work in King's Lynn

Lead is used around chimneys, skylights, flat roof edges and valleys - and when it fails, water follows quickly. We carry out all types of lead work on King's Lynn properties, from re-flashing a leaking chimney to full-scale flat roof lead coverings. All our lead work is dressed and finished to BS EN 12588 standards.

What's involved

How we handle lead work

Lead is the material of choice wherever a roof meets a vertical surface - around chimney stacks, dormer cheeks, valley gutters and parapet walls. It's durable when installed correctly, but old or poorly dressed lead cracks, lifts and allows water to track into the roof structure, often showing up as damp patches on internal ceilings well away from the actual entry point.

We work with milled lead sheet in the appropriate code weights for each application - Code 4 for flashings, Code 5 or 6 for flat roof coverings. Flashings are cut, dressed and stepped into the mortar joints of brickwork using proper lead wedges and weather-resistant pointing. We don't use flash band or silicone as a substitute - those are temporary fixes that tend to fail within a couple of seasons, particularly in Norfolk's changeable climate. For flat roofs, lead is laid in bays with proper drips and rolls to allow for thermal movement, which is the main reason DIY lead work fails.

Lead work requires an understanding of how different metals behave under temperature changes and how to detail junctions so they shed water rather than collect it. A poorly dressed chimney flashing is one of the most common causes of significant loft and ceiling damage we see in King's Lynn properties.

We survey the affected area before we quote, so you're not paying for guesswork. Most flashing replacements around a single chimney stack take half a day to a full day. We guarantee all our lead work for ten years against defects in workmanship.

Replacing lead flashing around a chimney in King's Lynn typically costs between £300 and £700, depending on the size of the stack and the condition of the surrounding mortar joints.

Itemised quote
Materials, labour, scaffold broken out
Fixed start date
With a daily schedule

Get your free quote

No obligation · We usually respond within 2 hours

By submitting you agree to being contacted about your enquiry. No spam, ever.

Emergency roof repair?

Storm damage, active leak, damaged ridge - we aim to be on-site within 24 hours.

Call now: 01553 603644
Questions

What people ask first.

Replacing lead flashing around a standard chimney stack in King's Lynn costs between £300 and £700. The price depends on the size of the stack, how much lead is needed and whether the mortar joints need repointing at the same time. We'll give you a fixed quote after inspecting the job.
The most common signs are damp patches on ceilings near a chimney breast or dormer, visible lifting or cracking of the lead itself, or mortar that has fallen out from around the flashing. In some cases the lead looks fine from the ground but has been incorrectly dressed and is channelling water inward rather than away. A proper inspection from roof level is the only reliable way to assess it.
For most applications, yes. Properly installed lead outlasts all the modern alternatives and can last 50 to 100 years. There are lead-free alternatives such as Ubiflex for heritage or listed buildings where lead theft is a concern, and we can advise on those where appropriate. We'll always recommend what's right for your property rather than the most expensive option.
Other services

More from Kings Lynn Roofers